G Pen Connect User Guide — 510 Thread Concentrate Attachment for Water Pipes

G Pen Connect Complete User Guide

The G Pen Connect is a 510-thread concentrate vaporizer designed to attach directly to any water pipe (rig). It instantly transforms a standard glass rig into an electronic rig with built-in battery power and 3 heat settings.

---

Unboxing — What Is Included

• G Pen Connect unit (battery + atomizer built-in)
• Glass Adapter for Male 14mm Joint
• Glass Adapter for Male 10mm Joint
• USB-C charging cable
• Dabber Tool
• User manual

Fully charge before first use.

---

Setup — Pairing with Your Rig

Step 1 — Choose the Right Adapter

Select the Glass Adapter that matches your rig joint size:

• 14mm Male Adapter — For rigs with a 14mm Female Joint (most common)
• 10mm Male Adapter — For rigs with a 10mm Female Joint

Step 2 — Attach the Connect to Your Rig

Slide the Glass Adapter onto the G Pen Connect, then insert it into your rig joint just like a standard bowl. Ensure it sits snugly without wobbling.

Step 3 — Fill Your Rig with Water

Add clean water to your rig as you normally would with a regular bowl.

---

Three Heat Settings

Press the button to cycle through levels. The LED color indicates the current setting:

How to Use

1. Power on (5 clicks).

2. Remove the atomizer cap.

3. Use the Dabber Tool to place a small amount of concentrate (rice-grain size) on the ceramic atomizer.

4. Replace the cap.

5. Attach the G Pen Connect to your rig via the Glass Adapter.

6. Press the button to select your heat level (green/blue/red).

7. Press and hold the button to begin heating.

8. Draw slowly and steadily through the rig. The water filters and cools the vapor.

9. Release the button to stop heating.

---

Cleaning and Maintenance

After Every Session

• Swab the ceramic atomizer with a cotton Q-tip while still warm.
• Clean your rig as usual (drain water, soak in ISO).

Deep Cleaning

• Remove the Glass Adapter and soak in ISO for 15-30 minutes.
• Remove the atomizer cap and soak in ISO.
• Carefully swab the atomizer with an ISO-dipped Q-tip.
• Never submerge the main unit in liquid. Clean only the glass components.

---

Tips from GoodGuy

• The G Pen Connect is the simplest and most affordable way to turn any rig into an e-rig.
• Start on Low (green) for the best flavor experience.
• Use small amounts of concentrate and add more as needed.
• Q-tip cleaning after every session dramatically extends atomizer life.
• Charge after every session.

If you have any questions, feel free to reach out to the GoodGuy team via LINE. We are happy to help.