Complete guide for the XMAX V3 Pro covering unboxing, setup, On-Demand and Session modes, 5 temperature presets, dosing capsules, WPA, and maintenance.
XMAX V3 Pro Complete User Guide
The XMAX V3 Pro is a portable dry herb vaporizer featuring full convection (hot air) heating, delivering pure and flavorful vapor. It offers both On-Demand (heat on press) and Session (continuous heating) modes, charges via USB-C, supports dosing capsules, and connects to water pipes via the included 14mm WPA.
---
Unboxing & What's in the Box
Your XMAX V3 Pro package includes:
- XMAX V3 Pro device
- Glass mouthpiece
- USB-C charging cable
- Cleaning tools (brush, tweezers)
- Dosing capsules
- Water Pipe Adapter (WPA) — 14mm
- User manual
---
Setup & Powering On
Power On/Off
- Press the power button 5 times rapidly to turn on or off.
- The display shows the current temperature.
Temperature Presets (5 Levels)
Press the up/down buttons to choose from 5 preset temperatures:
| Level | Temperature | Use Case |
|---|---|---|
| 1 | 180°C / 356°F | Maximum flavor, full terpene expression |
| 2 | 190°C / 374°F | Balanced flavor and vapor |
| 3 | 200°C / 392°F | Thicker vapor, more active compounds |
| 4 | 210°C / 410°F | Dense vapor, near-full extraction |
| 5 | 220°C / 428°F | Maximum extraction |
Two Usage Modes
On-Demand Mode
- Press and hold the button while inhaling — the heater activates instantly.
- Release when you stop inhaling — the heater turns off.
- Ideal for single draws, conserving both battery and material.
Session Mode
- Press and hold the button, then release — the device heats continuously for approximately 5 minutes.
- Best for longer sessions or sharing with friends.
---
Loading the Chamber
1. Remove the glass mouthpiece.
2. Grind your herb to a medium consistency.
3. Load the chamber loosely to about 70-80% — do not pack tightly.
4. Using dosing capsules is recommended: pre-fill a capsule and drop it into the chamber for quick swaps and a cleaner chamber.
5. Replace the mouthpiece.
---
Using with a Water Pipe (WPA)
1. Remove the glass mouthpiece.
2. Insert the 14mm WPA in place of the mouthpiece.
3. Connect the WPA to any 14mm glass water pipe.
4. Use as normal — the water cools and smooths the vapor significantly.
---
Cleaning & Maintenance
After Each Session
- Tap out spent material from the chamber while still warm.
- Brush the chamber clean.
Deep Clean (Weekly)
- Soak the glass mouthpiece in 90%+ isopropyl alcohol (IPA) for 30 minutes.
- Use a cotton swab dipped in IPA to wipe inside the chamber.
- Rinse the mouthpiece with warm water and dry thoroughly.
- Soak dosing capsules in IPA, then rinse.
Care Tips
- Charge the battery when it reaches 20% — avoid fully draining it.
- Store in a dry place away from direct sunlight.
- Replace the chamber screen when airflow becomes restricted.
Was this article helpful?
Related Articles
Portable vs Desktop — Which One Is Right for You?
A detailed comparison of portable and desktop vaporizers with pros, cons, use cases, and popular model recommendations for each type.
Tinymight 2 Complete User Guide
Complete Tinymight 2 guide covering unboxing, on-demand convection heating, instant heat-up, glass stem, adjustable bowl depth, micro-dosing technique, and maintenance.
DynaVap HyperDyn Guide - Latest High-Performance Model
Complete guide for the DynaVap HyperDyn. Covers the enhanced airflow system, advanced extraction techniques, Captive Cap, and detailed usage instructions.
DynaVap B2 / BB3 Beginner's Guide
Complete beginner-friendly guide for the DynaVap B Series (B2 and BB3). Everything you need to know for your first DynaVap session including setup, heating, and maintenance.