Complete guide for the G Pen Elite II premium dry herb vaporizer with 360-degree ceramic oven, LED display, and single-degree precision from 200-430F.
G Pen Elite II Complete User Guide
The G Pen Elite II is a premium dry herb vaporizer from G Pen featuring a 360-degree full-surround ceramic oven, LED temperature display, and single-degree precision control across a 200-430 F range.
---
Unboxing — What Is Included
- G Pen Elite II unit
- Mouthpiece with Zirconia Air Path
- USB-C charging cable
- Packing Tool
- Cleaning brush, spare screens
- User manual
Fully charge before first use. Initial charge takes approximately 2 hours.
---
Initial Setup
Charging
Connect the USB-C cable and charge until the LED shows full battery. The device supports pass-through charging so you can use it while charging.
Power On
Press the power button 5 times rapidly. The LED display will show the current and target temperatures.
---
360-Degree Ceramic Oven
The Elite II uses a full-surround 360-degree ceramic oven that heats evenly from all sides. This eliminates hot spots and ensures consistent extraction throughout the entire chamber.
---
Loading the Chamber
1. Remove the mouthpiece to expose the ceramic oven.
2. Grind your material to a medium consistency.
3. Fill the oven and tamp lightly with the Packing Tool. Pack it moderately — not too loose, not too tight.
4. Replace the mouthpiece.
---
Temperature Settings
The LED display shows the exact digital temperature. Adjust in single-degree (1 F) increments across the full 200-430 F range.
| Level | Temperature (F) | Characteristics |
|---|---|---|
| Low | 200-340 F | Very light flavor, minimal vapor, good for flavor exploration |
| Medium-Low | 340-370 F | Excellent flavor, light to moderate vapor |
| Medium | 370-400 F | Balanced flavor and vapor, recommended for daily use |
| High | 400-430 F | Dense vapor, maximum extraction, reduced flavor |
---
How to Use
1. Power on with 5 clicks.
2. Set your desired temperature using the up/down buttons.
3. Wait for the LED to confirm the target temperature is reached (approximately 30 seconds).
4. Draw slowly and steadily through the mouthpiece.
5. Stir the material when flavor begins to diminish to expose fresh surfaces to heat.
6. When finished, press the button 5 times to power off.
---
Cleaning and Maintenance
After Every Session
- Empty spent material while the oven is still warm (easier than when cool).
- Brush the ceramic oven clean.
Deep Cleaning (Weekly)
- Remove the mouthpiece and screen. Soak in Isopropyl Alcohol for 15-30 minutes.
- Swab the inside of the oven with an ISO-dipped cotton Q-tip.
- Rinse with warm water and dry completely before reassembling.
- Replace the screen when it becomes clogged.
---
Tips from GoodGuy
- Start at 360-370 F and increase by 10 F to find your ideal temperature.
- Grind evenly for the best results from the 360-degree oven.
- Clean the oven after every session to maintain flavor quality and device longevity.
- The Zirconia Air Path delivers cleaner, cooler vapor than standard plastic paths.
If you have any questions, feel free to reach out to the GoodGuy team via LINE. We are happy to help.
Was this article helpful?
Related Articles
Portable vs Desktop — Which One Is Right for You?
A detailed comparison of portable and desktop vaporizers with pros, cons, use cases, and popular model recommendations for each type.
Tinymight 2 Complete User Guide
Complete Tinymight 2 guide covering unboxing, on-demand convection heating, instant heat-up, glass stem, adjustable bowl depth, micro-dosing technique, and maintenance.
Voozr P2 B Pen Beginner Guide
Beginner-friendly Voozr P2 B Pen guide covering unboxing, setup, 3 LED temperature levels, 360-degree ceramic heating, one-button operation, and maintenance.
DynaVap UniDyn (Ball Vape) Guide - Heat Soak Technique & Induction Heater
Complete guide for the DynaVap UniDyn Ball Vape Attachment. How it works differently from standard DynaVap, heat soak technique, pairing with induction heaters.