Storz & Bickel Mighty+ User Guide — The Gold Standard Portable Vaporizer

Storz & Bickel Mighty+ Complete User Guide

The Mighty+ (Mighty Plus) from Storz & Bickel, Germany, is widely regarded as the gold standard of portable vaporizers. It uses hybrid heating (convection + conduction), charges rapidly via USB-C Supercharge, supports dosing capsules, features an effective cooling unit, and includes a Super Booster function for temporary peak temperature.

---

Unboxing & What's in the Box

• Mighty+ device
• Cooling unit (pre-installed)
• USB-C charging cable (Supercharge)
• Filling aid
• Dosing capsule starter set
• Spare seal rings
• Cleaning tools (brush, pick)
• User manual

---

Powering On & Temperature

Power On/Off

• Press and hold the power button for 3 seconds.
• The display shows current and target temperatures.

Temperature Control

• Press +/- to adjust between 40-210°C (104-410°F).
• Heat-up time is approximately 60 seconds.

Super Booster

• Press and hold the + button to activate.
• Temporarily raises maximum temperature by 10°C.
• Ideal for the final draws of a session to extract remaining compounds.

---

Hybrid Heating — Why It's the Best

The Mighty+ combines both conduction and convection:

• Conduction: Chamber walls heat the material directly — vapor from the very first draw.
• Convection: Hot air flows through the material — pure flavor and even extraction.
• The result: thick, flavorful vapor with consistent performance from start to finish.

---

Loading the Chamber

Direct Loading

1. Remove the cooling unit.

2. Place the filling aid (funnel) on the chamber.

3. Grind herb to a medium consistency.

4. Pour into the chamber through the filling aid.

5. Tamp lightly, then remove the filling aid.

6. Replace the cooling unit.

Using Dosing Capsules

1. Open a capsule and fill with ground herb.

2. Close the capsule.

3. Drop the capsule into the chamber.

4. Replace the cooling unit.

---

USB-C Supercharge

• Charges from 0-80% in approximately 40 minutes via USB-C.
• Delivers roughly 8-10 sessions per full charge.
• Supports pass-through charging — use the device while it charges.

---

Cooling Unit Maintenance

The cooling unit is the plastic assembly on top that cools the vapor:

• Disassemble and clean every 5-10 sessions.
• Soak in 90%+ IPA for 30 minutes.
• Rinse with warm water and dry thoroughly.
• Replace seal rings when they become loose or degraded.
• Resin that collects inside the cooling unit can be reclaimed if desired.

---

Cleaning & Maintenance

After Each Session

• Tap out spent material from the chamber.
• Brush the chamber clean.

Deep Clean (Every 1-2 Weeks)

• Remove and soak the cooling unit in IPA.
• Wipe the chamber interior with a cotton swab dipped in IPA.
• Clean screens with IPA.
• Rinse all parts with warm water before reassembling.

Care Tips

• Use dosing capsules to minimize chamber cleaning frequency.
• Store in a protective carrying case.
• Avoid charging in extremely hot environments.