PAX Plus Complete User Guide

PAX Plus Complete User Guide

The PAX Plus is a premium portable herbal vaporizer from California, USA. It features haptic feedback, four experience modes, and an automatic lip-sensing system that optimizes heating when you draw.

---

Unboxing

Your PAX Plus box includes:

• PAX Plus device
• USB-C charging cable
• Half-Pack Lid
• Standard Oven Lid
• Multi-Tool for cleaning
• Pipe Cleaners
• Quick Start Guide

---

Initial Setup

Step 1 — Charge the Battery

Connect the USB-C cable and charge fully (approximately 1-2 hours). The LED petals will show four full bars when complete.

Step 2 — Open the Oven and Load

Pull the oven lid from the bottom of the device. Use the Half-Pack Lid for smaller loads or the Standard Lid for full sessions.

Step 3 — Prepare Your Herbs

Grind your herbs finely (fine grind) and pack them firmly into the oven. A firm pack is critical for vapor quality. Do not pack so tightly that airflow is blocked, but avoid loose packing.

---

How to Use

Power On: Press and hold the side button for 2 seconds. The device will vibrate (haptic feedback) to confirm.

Lip Sensing: The PAX Plus has automatic lip-sensing technology. When your lips touch the mouthpiece, the device boosts heat. When removed, it reduces temperature to conserve your herbs.

Drawing Technique: Draw slowly, steadily, and gently. Do not pull hard. Let the heat do the work for the best vapor production.

---

4 Experience Modes

Select modes using the device button:

---

Temperature Settings

The PAX Plus offers four preset temperature levels:

> Tip: Start at level 1-2 for the best flavor. Increase to 3-4 as the vapor thins to finish your session.

---

Cleaning and Maintenance

After every session: Empty the oven while still warm. Use the Multi-Tool to scrape out residue.

Deep clean every 5-10 sessions:

1. Dip a Pipe Cleaner in Isopropyl Alcohol (91%+) and run it through the vapor path

2. Wipe the oven with an alcohol-soaked cotton swab

3. Clean the mouthpiece with an alcohol wipe

4. Allow all parts to dry completely before reassembling

---

Expert Tips

• Fine, consistent grind — The finer and more uniform the grind, the better the vapor. Use a quality grinder.
• Firm pack — Pack firmly but not brick-tight. Test by drawing gently; you should feel airflow resistance without blockage.
• Half-Pack Lid — Use for smaller amounts. It delivers denser vapor than a loosely packed full oven.
• Tilt the device slightly while drawing to help distribute heat more evenly across the herbs.
• Charge regularly — Avoid fully draining the battery to extend its long-term lifespan.