Puffco New Peak User Guide — The Original E-Rig

Complete Puffco New Peak User Guide

The Puffco Peak is the original E-Rig that revolutionized the concentrate world by eliminating the need for a torch. The New Peak is an updated version of the classic, featuring 4 temperature levels, a Bucket Insert system, and a straightforward design that makes dabbing accessible.

---

Unboxing — What Is in the Box

• Puffco Peak base unit (built-in battery)
• Ceramic Bucket Insert (Atomizer)
• Glass Attachment
• Carb Cap
• Dabber Tool
• USB charging cable
• Loading Tool

---

Initial Setup

Step 1 — Install the Atomizer

Insert the Atomizer (Bucket Insert) into the top slot of the base unit. Press down gently until it locks into place.

Step 2 — Attach the Glass

Place the Glass Attachment onto the base, aligning the holes properly. Press down gently until secure.

Step 3 — Fill with Water

Add clean water through the mouthpiece. The water level should be just above the percolator.

Step 4 — Power On

Click the button 5 times rapidly to power on. The LED will illuminate to confirm the device is on.

---

4 Temperature Settings

Double-click the button to cycle through heat levels. The LED color changes with each setting.

How to Dab

1. Select your desired temperature level.

2. Use the Dabber to place a small amount of concentrate into the Ceramic Bucket.

3. Press and hold the button to begin heating — the device vibrates when ready.

4. Immediately place the Carb Cap over the Bucket.

5. Inhale slowly through the mouthpiece.

Carb Cap Technique

The Carb Cap is essential for getting the best performance from the Puffco Peak:

• Cap immediately after heating starts to trap air and create back-pressure.
• Rotate gently while inhaling to distribute heat inside the Bucket.
• Lift and press rhythmically to control airflow (directional airflow technique).

---

Sesh Mode

Double-click during an active session to extend the heat cycle. This helps vaporize any remaining concentrate.

---

Bucket Insert Options

The Puffco Peak supports multiple bucket materials:

• Ceramic (included) — Durable with solid flavor
• Quartz — Cleaner taste, easier to maintain
• Silicon Carbide (SiC) — Even heat distribution, excellent flavor

Replace by removing the Atomizer and swapping the Bucket inside.

---

Maintenance and Cleaning

After Every Session

• Use a Cotton Swab dipped in Isopropyl Alcohol to wipe the inside of the Bucket while still warm.
• Replace the water in the glass after each use.

Deep Clean (Weekly)

• Remove the Atomizer and soak in Isopropyl Alcohol for 20-30 minutes.
• Clean the glass with Alcohol, then rinse with water.
• Allow all parts to dry completely before reassembling.

Atomizer Replacement

When the Atomizer produces off-flavors or reduced vapor despite adequate concentrate, it is time to replace the Atomizer.

---

Pro Tips

• Dab size: Start with rice-grain amounts and adjust upward as needed.
• Cold Start: Try loading concentrate into the Bucket before activating the heat for a flavor-forward session.
• Maintain the Atomizer: Cleaning after every session dramatically extends Atomizer life.
• Drain the glass: Empty the water after every session to prevent residue buildup.
• The Original: The Peak may not have all the features of the Peak Pro, but it delivers an excellent experience at a more accessible price point.