Complete guide to the Dr. Dabber Boost EVO portable E-Rig with 6 presets (500-750°F), IntelliTEMP sensor, 11-second heat-up, and Snaptech magnetic atomizer.
Complete Dr. Dabber Boost EVO User Guide
The Dr. Dabber Boost EVO is a portable E-Rig designed for concentrates, featuring 6 preset temperatures (500-750°F), an IntelliTEMP Sensor for precise temperature control, an 11-second heat-up time, and the Snaptech Magnetic Atomizer for tool-free swaps.
---
Unboxing — What Is in the Box
- Boost EVO base unit (built-in battery)
- Glass Attachment (Quartz)
- Snaptech Magnetic Atomizer
- Magnetic Carb Cap
- Dabber Tool
- USB-C charging cable
- Carrying case
---
Initial Setup
Step 1 — Install the Snaptech Atomizer
The Snaptech Atomizer uses a magnetic connection. Simply place the Atomizer onto the base and the magnets will snap it into position. No twisting or pressing required.
Step 2 — Attach the Glass
Place the Glass Attachment onto the Atomizer. Fill with clean water through the mouthpiece.
Step 3 — Power On
Press the Power button 5 times. The LED will display the current preset color.
---
6 Temperature Presets (500-750°F)
Double-click to cycle through presets. Each color has a fixed temperature.
| Preset | Color | Temperature | Characteristics |
|---|---|---|---|
| 1 | Blue | ~500°F | Best flavor, light vapor |
| 2 | Green | ~550°F | Flavor-forward balance |
| 3 | Yellow | ~600°F | Balanced flavor and vapor |
| 4 | Orange | ~650°F | Thicker vapor |
| 5 | Red | ~700°F | Dense vapor, strong extraction |
| 6 | White | ~750°F | Maximum extraction, thickest vapor |
IntelliTEMP Sensor
The IntelliTEMP system is a real-time temperature sensor built into the Atomizer:
- Monitors the actual temperature at the concentrate surface
- Automatically adjusts power to maintain a consistent temperature throughout the session
- Provides overheat protection
- Ensures consistent results from every dab
---
How to Use
1. Select your desired preset.
2. Use the Dabber to load a small amount of concentrate into the Atomizer.
3. Press and hold the button to begin heating — ready in 11 seconds.
4. Place the Magnetic Carb Cap on immediately (magnets align it automatically).
5. Inhale slowly and steadily through the mouthpiece.
6. Each session lasts approximately 30 seconds. Press the button again to Boost.
---
Snaptech Magnetic Atomizer
The standout feature of the Boost EVO is the Snaptech system:
- Easy removal: Pull straight up and the magnets release.
- Easy installation: Place it down and the magnets snap it into alignment.
- Easy cleaning: Remove and soak in Alcohol immediately.
- Quick swaps: Switch between a clean Atomizer and a used one instantly.
---
Maintenance and Cleaning
After Every Session
- Remove the Atomizer (effortless thanks to magnets).
- Swab the inside with a Cotton Swab dipped in Isopropyl Alcohol while still warm.
- Replace the water in the glass.
Deep Clean (Weekly)
- Soak the Atomizer in Isopropyl Alcohol for 30 minutes. Rinse and air dry.
- Clean the glass with Alcohol.
- Wipe down the base with an Alcohol-dampened cloth. Avoid getting liquid in the charging port or magnetic contacts.
---
Pro Tips
- 11 seconds is real: It heats up fast, so have your concentrate loaded before pressing the button.
- Magnetic Carb Cap: The magnets ensure perfect alignment every time.
- Portable-ready: Comes with a carrying case, making it ideal for travel.
- Start with Preset 2-3: A good balance for most users starting out.
- Spare Atomizer: Keep a backup Atomizer so you can swap while one soaks in Alcohol.
Was this article helpful?
Related Articles
Portable vs Desktop — Which One Is Right for You?
A detailed comparison of portable and desktop vaporizers with pros, cons, use cases, and popular model recommendations for each type.
Tinymight 2 Complete User Guide
Complete Tinymight 2 guide covering unboxing, on-demand convection heating, instant heat-up, glass stem, adjustable bowl depth, micro-dosing technique, and maintenance.
DynaVap M7 / M7 XL Complete User Guide
Complete step-by-step guide for the DynaVap M7 and M7 XL. Covers unboxing, torch heating technique, temperature control, airport adjustment, cleaning, and troubleshooting.
DynaVap B2 / BB3 Beginner's Guide
Complete beginner-friendly guide for the DynaVap B Series (B2 and BB3). Everything you need to know for your first DynaVap session including setup, heating, and maintenance.