Tinymight 2 Complete User Guide

Tinymight 2 Complete User Guide

The Tinymight 2 is a high-end portable herbal vaporizer handcrafted in Finland. Its defining feature is on-demand convection heating that delivers instant vapor with no preheating required. Combined with a glass cooling stem, adjustable bowl depth, and a removable 18650 battery, it is built for enthusiasts who value precision and control.

---

Unboxing

Your Tinymight 2 box includes:

• Tinymight 2 device (wood or metal body)
• Glass Cooling Stem
• USB-C charging cable
• Bowl depth adjuster
• Replacement screens
• Quick Start Guide

---

Initial Setup

Step 1 — Charge the Battery

Connect the USB-C cable and charge fully. The LED changes color when complete. The battery is a removable 18650 that can also be charged externally.

Step 2 — Burn-Off

Run the device empty at maximum temperature for 3-5 heat cycles before your first real session to clear manufacturing residue.

Step 3 — Insert Screen and Load

Place a screen at the bottom of the glass stem bowl. Grind herbs to a medium-coarse consistency and drop them loosely into the bowl. Do not pack.

---

How to Use

Power On: Click the button 5 times rapidly.

Set Temperature: Rotate the temperature dial on the device body, from lowest to highest.

On-Demand Mode: Press and hold the button while drawing. Release when you stop. The heater activates only while the button is held, reaching temperature within 5 seconds.

Session Mode: Double-click the button. The device maintains temperature continuously for about 5 minutes. Best for sharing or relaxed use.

Draw: Inhale slowly and deeply through the glass stem. The convection system produces vapor instantly as you draw.

---

Temperature Settings

> Tip: For on-demand mode, set the dial to medium-high. Since the heater only runs while you draw, a higher setting compensates for the shorter heating window.

---

Adjustable Bowl Depth

The Tinymight 2 lets you change the bowl size:

• Full Bowl — For longer sessions with more herb loaded.
• Shallow Bowl (Micro-Dose) — Use the depth adjuster to reduce the bowl size, perfect for single-draw micro-doses with minimal herb.

---

Micro-Dosing Technique

The Tinymight 2 excels at micro-dosing:

1. Set the bowl to shallow — Use the depth adjuster to minimize the chamber.

2. Load a tiny amount — Approximately 0.05-0.1 grams of herb.

3. Use on-demand mode — Press the button, take one long draw, and release.

4. One bowl = one draw — At medium-high temperature, a shallow bowl extracts completely in a single hit.

---

Cleaning and Maintenance

Glass Stem (every 3-5 sessions):

1. Remove the screen from the stem

2. Soak the glass stem in Isopropyl Alcohol (91%+) for 15-30 minutes

3. Rinse with warm water, dry thoroughly, and insert a fresh screen

Device body:

• Use an alcohol-dipped cotton swab to wipe the heater chamber
• Blow out debris from the airpath
• Inspect screens and replace when clogged

Screen replacement: When a screen becomes heavily clogged with residue, replace it immediately rather than attempting to clean a worn screen.

---

Expert Tips

• On-demand is the star feature — Use this mode for the best experience. Draw one hit at a time for total control.
• Medium-coarse grind — Convection heating performs best when air flows freely through the material.
• Do not pack — Drop herbs loosely into the bowl and let them sit naturally.
• Micro-dose regularly — Shallow bowl, minimal herb, one on-demand draw. Maximum efficiency.
• Removable 18650 battery — Carry a spare for all-day use without needing to find a charger.
• Experiment with draw speed — Slow, long draws produce lighter vapor. Slightly faster draws increase vapor density.